COLOURLOCK Artificial Leather Care Set

Artificial leather and grained plastic surfaces are robust, hard-wearing materials used in vehicles, furniture, bags, clothing and many other areas. Despite their resistance, dirt, skin oils and deposits accumulate over time in the surface and grain structure, affecting the appearance and potentially causing embrittlement and wear. Regular cleaning and care are therefore recommended. The Artificial Leather Care Set contains all the products needed to do this simply and effectively.

Thoroughly clean heavily soiled surfaces with Artificial Leather Cleaner. Use the brush included in the set for dirt in the grain structure. Artificial Leather Protector then seals the surfaces, reduces resoiling and counteracts embrittlement without changing the gloss level.

The set contains 250 ml cleaner, 100 ml protector, a cleaning brush, a cleaning sponge and a cleaning cloth. The quantities are sufficient to treat a complete vehicle interior or a furniture suite once. For extreme soiling, the products can of course be purchased separately.

Please read the notes below carefully before each application!

Artificial Leather Cleaner: Apply a little cleaner to the sponge lightly moistened with water and squeeze out the foam. Clean the entire surface with the foam. For dirt in the grain, use the cleaning brush. Remove the soiled foam with a clean, slightly damp cloth. A light-coloured cloth shows whether further cleaning is necessary.

Artificial Leather Protector: Apply the Protector once the surfaces have dried after cleaning. Rub a little Artificial Leather Protector into a soft cloth and apply it thinly and evenly; allow it to dry without polishing. One application is generally sufficient. Repeat only on extremely sensitive or heavily used surfaces.

Repeat the care every 3 months on heavily used areas and every 6 to 12 months on normally used surfaces. Always clean first if soiled.

• Always test products first in an inconspicuous area for changes.
• Care and protective products should always be applied to a clean surface.
• Shake products before use.
• Protect products from frost and heat (+40 °C).
• Observe hazard symbols on bottles, if present.