Colourlock Allround Textile Sealant, 500 ml

Textiles become soiled over time or develop stains. All-round Textile Sealant protects all types of textiles from dirt, water and stains without changing their appearance or feel. All-round Textile Sealant is water-based and free from solvents and fluorocarbon resins.

With All-round Textile Sealant, you benefit from protection that lasts for up to 24 months, depending on the textile fibre, intended use, wear and care – equivalent to up to 50 wash cycles at 30 °C. 

1. Thoroughly clean the textiles to be treated beforehand with Pol Star and then allow them to dry completely. For the subsequent treatment steps, the textiles must be dry, clean and free from any residue.
2. Cover or, if necessary, mask off all areas that are not to be sealed.
3. Using the Cleaning and Application Sponge large, apply All-round Textile Sealant to the surface as evenly as possible until a thin, even film is visible.
4. Then work the product completely into the surface in crosswise motions with the sponge and allow it to dry.
5. For an optimum result, an application temperature between 10 °C and 40 °C is recommended.
6. Depending on the textile and ambient temperature, complete drying and full development of the protective effect take up to 24 hours.
7. Clean the sealed surfaces only gently. We recommend our Pol Star for this purpose.

• Before reapplying, always first check for soiling.
• Care and protective products should always be applied to a clean surface.
• Shake before use.
• Protect from frost and heat (+40 °C)