COLOURLOCK Alcantara & Textile Care Set

High-quality textiles and Alcantara are constantly exposed to dirt, stains and everyday wear, whether in vehicle interiors, on upholstered furniture or carpets. Conventional cleaning products are often too aggressive and can permanently damage the delicate fibre structure. The Alcantara & Textile Care Set offers a coordinated solution that ensures thorough cleaning and reliable protection against future soiling.

The set contains our gentle Pol Star textile cleaner and a water-repellent treatment specially matched to the needs of high-quality textiles and microfibres such as Alcantara. The cleaner removes stains and soiling effectively without attacking the surface structure. The subsequent protective treatment forms an invisible film on the treated surfaces and reduces the penetration of dirt and moisture.

The set includes 250 ml textile cleaner, 500 ml protective treatment, a cleaning sponge, cloths and a brush. These are sufficient for thorough cleaning and care of a complete furniture suite or vehicle interior.

Please read the notes below carefully before each application!

Cleaning: Dilute Pol Star with water at a ratio of 1:5 to 1:20, depending on the level of soiling, and apply it evenly using a spray bottle, microfibre glove or similar aid. Allow it to act briefly, then work it in carefully with a sponge or microfibre cloth in the direction of the main fibre. Remove residues and foam with a damp cloth. Use the brush locally for stubborn soiling.

Stain removal: Apply the cleaner to a sponge or soft brush. Squeeze foam from the sponge. Clean the surface in circular movements, at least lightly from seam to seam, to prevent cleaning marks. Then wipe with a slightly damp cloth. Do not rub too hard or work too wet. Repeat if necessary.

Fresh stains should always be absorbed immediately with a clean, absorbent cloth. Dab them or absorb them towards the centre; do not rub. Never rub too hard, as this can permanently alter the surface. For larger stains, always clean from seam to seam.

Care and protection with Allround Textile Sealant

Cover or mask all areas that are not to be sealed. Apply Allround Textile Sealant as evenly as possible with the Cleaning and Application Sponge large until a thin, even film is visible.

Then work the product in completely with the sponge in a crosswise pattern and allow it to dry.

For optimum results, a processing temperature between 10 °C and 40 °C is recommended. Depending on the textile and ambient temperature, complete drying and development of the protective effect take up to 24 hours.

• Always test products first in an inconspicuous area for changes.
• Care and protective products should always be applied to a clean surface.
• Shake products before use.
• Protect products from frost and heat (+40 °C).
• Observe hazard symbols on bottles, if present.